Wire Balustrade Kit #31 – Jaw/Jaw System (Timber & Metal)

This popular wire balustrade system is versatile and designed for fixing 3.2mm wire rope to timber posts or metal posts.

The jaw/jaw bottlescrew can be easily fixed to the saddles by removing a pin at one end.

Using flexible 7x7 or 7x19 wire, run the wire through the swage/ferrule and loop through a thimble, then back into the swage and simply crimp using our 350mm mechanical hand swaging tool or 600mm mechanical hand swaging tool or light duty hydraulic swaging tool.

For Metal Posts: With the rivet in the saddle recess, the thickness is approximately 1.1mm. So please add this amount to your post thickness when considering which rivet size. eg. For a post thickness of 2.5mm: 1.1mm + 2.5mm = 3.6mm minimum grip range (4-3 rivet or above).

1x19 wire is unsuitable for looping around thimbles. A more flexible wire, either 7x7 (most common) or 7x19 must be used.