BlackLine Espaliex Trellis Wire Hub 42mm for Espalier/Green Wall Stainless Steel (Black)

Espaliex Wire Trellis Hubs are specifically designed for running trellis wire along walls and other vertical surfaces, to help your vines, creepers and trees to grow.

Secure your espalier / trellis wire with this discreet and strong Espaliex 42mm Wire Trellis Hub.

Succesful installation is quite simple and doesn't require any special crimping or swaging tools. First, to secure the fitting into the post, you'll need a 75mm #2 phillips drive bit or a screwdriver. Drive the self-tapping screws provided through the internal shalf and through the base opening into the wall mounting point.

To install the wire, thread the wire through the holes, and then secure the wire in place by twisting the grub screw down using a 6mm allen key. Repeat the process above and pull the wire taught using a pair of pliers. Add end caps to protect the wire from fraying and pricking fingers.

Suits 3.2mm wire.

**Warning, please note **

DO NOT USE in saline/salt prone environments especially areas subjected to salt spray from the coast.  Any use within this environment will corrode the finish which cannot be rectified and will void any warranty. If your project is subject to this kind of environment, please contact us for clarification and alternative options.

Avoid using harsh cleaners, chemicals and abrasives on and around the BlackLine wire and fittings. The blackened surface of the stainless steel may be stripped off, discoloured or degraded.

AVOID acid based cleaners such as oxalic acid (deck cleaner), vinegar or InnoShine B570 / InnoGel B450.

USE a mild, pH neutral cleaner, such as orange citrus or mild detergent with a non-abrasive cloth.