Espaliex Trellis Wire Line Kit for Timber : Kit #E61s

A staff favourite, this stainless wire espalier/trellis kit is slimline, neat and aesthetically pleasing. It's designed to minimise the visual impact of your espalier wire. It is quite easy to install , reducing the 'hidden' labour cost of some of the lower cost systems available. Suitable for timber stairs, ramps and runs off timbers walls.

See #E61 for a straight line version. (This straight line version won't be able to be used on walls and is only suitable for straight wires between posts or beams.) 

DIY Install Instructions

1. Using a 13mm countersink bit, countersink the posts for your threaded timber inserts
2. Pre-drill your post holes for the threaded inserts using a 9.5mm drill bit.
3. Drive the threaded inserts into the posts with a 6mm hex drive bit
4. Insert the wire rope into the swage stud terminal ends at each end of your run.
5. Crimp the swage terminals onto the wire. These fittings require the use of a hydraulic swaging tool. 
6. Insert the RHT swage stud terminal into the RHT Pivot Point. Do vice versa for the LHT fittings.
7. Insert the RHT Pivot Point into the RHT Threaded Timber Insert. Do vice versa for the LHT fittings. Thread with hands first and tension the swage stud terminals with a spanner multi tool or spanner.

A.